Owatrol ESP Primer

Owatrol ESP Primer makes Any Oil or Water Based Paint stick to shiny smooth surfaces without sanding or mess.

• Cleans old painted or varnished surfaces and leaves a thin grip film before recoating. 
  
• Makes oil or water based paints stick to any smooth non-porous surface. 
  
• No tiresome or dusty sanding required. 
  
• May be painted over any time after 2 hours or up to 7 days later. 
  
• Easy to use... wipe on with a clean cotton cloth or brush. 
  
• Will not damage old coatings. 
  
• Reduces surface preparation time.

WHERE TO USE:  

• Lacquers, baked enamels, varnishes, gloss paint, powder coated steel,  
• Ceramics : bathroom or kitchen.
• Melamine : kitchen cabinet makeover, furniture 
• Glass, tiles, uPVC, Fibreglass, Melamine, powder coated metal, previously glossed or varnished surfaces, 

RECOMMENDATIONS BEFORE APPLICATION  

• Ensure new finish is compatible with the old finish. 
• Do not overcoat with 2 pack finishes, cellulose, xylene and urethane coatings . (oil or water based only)
• Remove any loose and flaking old finish. 
• For greasy, waxed or varnished surfaces, scrub surface with a green scourer or 00 steel wool soaked with ESP. Wipe off all ESP after 5-10 minutes then follow application instructions below. 
• Wipe up ESP before drying. Use clean clothes and change them regularly. 
• Do not contaminate new clean ESP with old used ESP. 
• Do not use ESP for dipping. 

APPLICATION  

• Apply a liberal application of ESP. 
• Leave to stand 5 minutes then lightly wipe over the surface in one direction with a clean cloth to remove excess ESP. 
• Allow ESP to dry for 2 hours, before applying the finish. 

Coverage: 18 m²/l 

Application tools : Brush, roller, rag. 

Application temperature : +5°C to +35°C 

Recoating time : 2h to 7 days. 

Clean-up : Soap + Water