Fillers & Chemicals

Decorating fillers and chemicals 

Filter results

The  Axus EP-Fill  can be used for  repairs of unlimited size/thickness and also for final levelling and smoothing of walls and ceilings Colour: White 5kg bag contains 5 x 1kg individual bags Does not flash or remain noticeable when overcoated with two coats of most good quality emulsions. Easy to sand Ideal for smoothing over textured surfaces including wallpaper Use for taping and jointing plasterboard For all repairs, large or small ADHERES TO : Plaster, plasterboard, old painted surfaces, other fillers, cement, concrete, aerated concrete & more. APPLY WITH : Filling knife, broad knife or trowel. SETS IN : 2 to 3 hours RECOAT IN :  12 hours for every 1cm thickness as a guideline, but this varies considerably depending on ambient conditions and the nature of the substrate. Tip: Vary mixing ratio according to application; mix into a mastic-like paste for heavy refilling to prevent shrinkage when drying
Owatrol Floetrol Waterborne Paint Conditioner  increases paint flow, leveling and workability • Extends the paint’s ‘wet edge’ to eliminate brush and roller marks • Reduces tip clogging when spraying • Increases covering power
The Axus Q3 Filler  is a rapid drying filler for repairs of any size/thickness, and fine smoothing before painting. Colour: Soft White 5kg bag contains 5 x 1kg individual bags Does not flash or remain noticeable when overcoated with two coats of most good quality emulsions. Recoatable in 3 hours* Holds extremely well ontomost substrates, even glazed tiles & old oil-based paint Contains marble dust for a very fine, durable finish Minimal shrinkage ADHERES TO : Plaster, plasterboard, old painted surfaces, other fillers, cement, concrete, aerated concrete & more. APPLY WITH : Filling knife or broad knife. SETS IN : 30 to 40 mins RECOAT IN : *3 hours as a guideline, but this varies depending on ambient conditions and the nature of the substrate. Tip: Vary mixing ratio according to application; mix into a mastic-like paste for heavy refilling
Owatrol E-B Mix In Bonder  is a high penetrating, stir-in paint additive for use in water-based masonry or interior paints. It will help alleviate peeling problems on all porous surfaces. Owatrol E-B is especially suitable for unstable, chalky and powdery surfaces, crumbling brickwork or render. Helps to alleviate peeling problems on sound but chalky, powdery or porous surfaces by stabilising the surface Provides a bonding primer and a first flat coat of masonry or interior paint in one Maximises adhesion between the first and second coats Improves the durability of the finish Eliminates the need for a separate stabilising solution so saves you time and money E-B acts as a stabiliser, penetrating deep into the surface to firmly bond the first coat of paint to the substrate. This, therefore, eliminates the need for primer. Owatrol E-B provides a bonding primer, stirs in easily, and does not alter the original colour of the paint. It offers a time-saving benefit by eliminating the need to separately prime. Why Should I Use Emulsa-Bond? E-B greatly speeds up and simplifies the painting process, especially on difficult substrates. Mixing it with the first coat ensures a strong, wear- and peel-resistant bond without the need to apply a separate primer and then allow it to dry before you begin painting the final colour. It is particularly useful for quick and effective painting of interior plaster, allowing the first coat of the final colour to also do the job of both primer and mist coat. E-B is also an extremely versatile product. It can be added to the first coat to replace a primer, but if for whatever reason you prefer a traditional, separate primer it can also be used for that. This product can bond paint to a wide range of surfaces including powdery, chalky, porous, or otherwise difficult surfaces. It can be used on plaster and masonry, wood, glass, plastic, and varnished surfaces. Ideal uses for Owatrol E-B Additive for waterbased paint and varnish. Use on all porous surfaces. Use as a primer or mixed with paint. E-B’s high solids content maintains the inherent characteristics of the paint, improves hiding power and increases coverage by up to 20%. Ensures an even coverage and maximum adhesion between the first and second coat of paint.
Owatrol Dilunett Water Based Stripper,  strips paint, stains, and varnish. (Not Polyurethane Varnish) Remove finish without scraping Gel consistency - does not drip or run Easily removed with water - makes the coating water soluble Does not evaporate and does not dry out in high temperature  Re-activated by wetting
The Axus AP Render  is ideal for repairing masonry walls, concrete, pointing and stone - use up to 2cm deep or at unlimited thickness when mixed with sand. Does not flash or remain noticeable when overcoated with two coats of most good quality emulsions. Ideal for repairing masonry, render and concrete Easy to mould and holds well - perfect for the repair of shaped stone and corners Doesn’t shrink Easy to sand ADHERES TO : Masonry, concrete, cement render & stone. Do not use on flooring. APPLY WITH : Filling knife or broad knife. SETS IN : 40 to 90 mins RECOAT IN : 12 hours for every 1 cm thickness as a guideline, but this varies considerably depending on ambient conditions and the nature of the substrate. Tip: Add approximately 20% sand (2mm particle size) to apply at generous thicknesses
The Dec-Patch MX Filler  is a convenient filler for quick repairs of small holes and cracks up to 5mm deep at a time. Colour: Soft White Does not flash or remain noticeable when overcoated with two coats of most good quality emulsions. Ready To Use Easy To Sand Contains marble dust for a very fine, durable finish. ADHERES TO : Plasterboard, old paintwork, concrete, brick, cement/plaster render, roughcast, breezeblock & more. APPLY WITH : Filling knife. RECOAT IN : 24 hours as a general guideline, but this will vary depending on the thickness of application, nature of surface and ambient conditions.
The Axus Dec-Patch Filler will f ill cracks, chases and holes up to 2cm deep. Also a finishing filler for smoothing before painting Colour: Soft White 5kg bag contains 5 x 1kg individual bags Does not flash or remain noticeable when overcoated with two coats of most good quality emulsions. Bonds and holds exceptionally well onto most substrates including old paintwork Easy To Sand Contains marble dust for a very fine, durable finish Minimal shrinkage ADHERES TO : Plaster, plasterboard, old painted surfaces, other fillers, cement, concrete, aerated concrete & more. APPLY WITH : Filling knife or broad knife. SETS IN : 50 to 70 mins RECOAT IN :  6 hours for every 1cm thickness as a general guideline, but this varies depending on ambient conditions & the nature of the substrate.
Owatrol Oil Paint Conditioner  is a p aint conditioner and rust inhibitor Can be used alone or added to oil based paints, primers, varnishes and stains Used alone it provides a tough, flexible finish, driving out moisture and air Used alone: coverage 18m2/litre Owatrol Oil is versatile, highly penetrating air drying oil that can be used alone or added to paint. Used alone as a rust inhibitor it provides a tough, flexible finish, driving out excess moisture and air; displacing it from rusted metal, so stopping rust dead in its tracks. Used alone on porous wood surfaces it will saturate and protect the wood from damage caused by moisture and prevent paint from peeling. When added as a paint conditioner to any oil or alkyd based coatings it will give increased wet edge time, improved flow and greater adhesion. Unlike damaging thinners, it will maintain the inherent quality of the paint without affecting its appearance or drying times, allowing you to achieve a more professional finish. Using Owatrol Oil as a rust inhibitor Owatrol Oil penetrates through the rusted metal to the sound metal below, isolating it and protecting it from further rusting. Directly use on rusted surfaced – the penetrating oil drives out moisture and air and stabilises the metal to protect it from future damage. Using Owatrol Oil to aid adhesion A bonding film is left on all surfaces Owatrol Oil is used on which maintains the natural look of the surface but allows enhanced adhesion, making it perfect as a foundation for primers or finishing coats. It gives excellent adhesion including on galvanised steel, aluminium, zinc, wood and more. Paint can be applied directly to firm rust when Owatrol Oil is used and is heat resistant up to +175°C. Using Owatrol Oil as a paint conditioner Mix Owatrol Oil into oil-based paints as a paint conditioner to get several great benefits. Firstly, it gives the paint rust inhibiting properties and helps prevent rust on painted surfaces (even when rust is already present). Secondly, it also improves the flow and workability of the paint. This means that you can maintain the ‘wet edge’ for longer, reducing brush and roller marks. Finally, it gives the paint a better viscosity allowing painting work to be carried out in a more extreme cold, hot and windy conditions. Unlike damaging paint thinners it does all this without altering the inherent qualities or the finish of the paint. Please note that if you are looking for a product to give this effect but for water-based paints then please use  Floetrol  instead as it is designed for use in any water-based paint whereas Owatrol Oil is for use in oil-based paints. Using Owatrol Oil for wood impregnation When used on wood surfaces Owatrol Oil saturates the wood and protects it from damage caused by moisture. It also helps to prevent paint from peeling and protects metal parts such as hinges and latches from corrosion. Ideal Uses for Owatrol Oil Priming galvanised surfaces with no need for weathering or pickling Preventing further damage in heavily rusted surfaces Improving paint flow when working in cold environments Preventing peeling paint on wood surfaces Protecting metal part on wood surfaces like gates and window frames Assuring better adhesion of finishes
The Axus Dec-X Painters Caulk  is suitable for filling gaps between skirting/coving and wall/ceiling, around frames and architraves, in brickwork, stone, concrete and cladding. Colour: Bright White Interior and exterior use Seals gaps and cracks Exceptional adherence to most substrates Easy to clean, water-based formula Resistant to mould Paintable with most paints - no primer required Stretches as joints move to prevent gap recurrence Drying Time: 1 hour, but this varies depending on depth of application, humidity etc.  For best results leave 4 hours before painting.
Ready to paint in minutes. Handy solution for small last minute repairs. Surface dry from 5 minutes.
Ready mixed formula The original versatile filler. Guaranteed adhesion, will not shrink or crack. Drillable
Use inside or out Dry in 2 hours Can be sanded, paned, filed, nailed & screwed Comes in tubs, tubes or cartridges Fills in 5mm layers
Excellent adhesion Flawless results Small Repair Filler
33% FREE Tetrion All Purpose Filler is s uitable for both interior and exterior use • Tough and water resistant • Interior and exterior use • Seal, bonds and fills most building materials • Vibration and shrink resistant • Very smooth finish • Can be drilled and tapped
  • 1
  • Showing 1 - 15 of 15 results
Back to top

© Decorhom 2024.
Online Shop Builder & ePOS System by ShopTill-e.com