Specialist Paint

Specialist and functional paints for the building and decorating trade.

Filter results

Peel Stop is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting or chalking is a problem. Use indoors or out to form a breathable membrane over questionable or faulty substrates. Peel Stop tightly bonds to old paint and problem areas forming a sound surface for new paint. Zinsser Peel Stop forms a tough acrylic film that stays flexible and helps prevent peeling by letting moisture escape. A clear sealer, Peel Stop works like nothing else to stop peeling problems on old or new surfaces. Recommended uses: Peel Stop prevents peeling, blistering, checking, cracking and flaking on wood siding and trim, yellow pine, rough sawn cedar, textured plywood, chalking or powdering, concrete and concrete block, stucco and galvanized gutters. Glues down peeling paint Stabilises cracking surfaces before repainting Stabilises chalking surfaces Transforms peeling surfaces into a sound surface Flexible and breathable Interior and exterior use Theoretical coverage 8m2/litre
1lt Size Water Based Zinsser AllCoat Exterior Gloss Paint  is an ultimate performance paint that offers supreme protection to all exterior surfaces. It forms a vapourpermeable, low maintenance, water-shedding tough finish that is recoatable in just 1 hour. Available in white, black and a selection of bases that can be tinted to any colour. The paint is self priming and can be applied to previously painted surfaces without sanding.. • 8 year performance • Excellent colour retention • Multi-surface application - glossy paints, bitumen, tar, varnish, creosote, Plastisol®, powder coatings, timber, metal, concrete and glossy paints • Available in BS, RAL and NCS colours • Flexible and micro porous with excellent resistance against cracking, blistering and flaking • Quick drying, self priming water borne system that can be finished in a day • Contains a biocide to protect the dried coating against fungal degradation • Theoretical coverage 12m2/litre
1lt Size Water Based Zinsser AllCoat Exterior Matt Paint is an ultimate performance paint that offers supreme protection to all exterior surfaces. It forms a vapour permeable, low maintenance, water-shedding tough finish that is recoatable in just 1 hour. Available in white, black and a selection of bases that can be tinted to any colour. The paint is self priming and can be applied to previously painted surfaces without sanding. • 8 year performance • Excellent colour retention • Multi-surface application - glossy paints, bitumen, tar, varnish, creosote, Plastisol®, powder coatings, timber, metal, concrete and glossy paints • Available in BS, RAL and NCS colours • Flexible and micro porous with excellent resistance against cracking, blistering and flaking • Quick drying, self priming water borne system that can be finished in a day • Contains a biocide to protect the dried coating against fungal degradation • Theoretical coverage 12m2/litre depending on substrate
Zinsser AllCoat Exterior Paint is an ultimate performance paint that offers supreme protection to all exterior surfaces. It forms a vapour permeable, low maintenance, water-shedding tough finish that is recoatable in just 1 hour. Available in white, black and a selection of bases that can be tinted to any colour. The paint is self priming and can be applied to previously painted surfaces without sanding. • 15 year performance • Excellent colour retention • Multi-surface application - bitumen, asbestos, varnish, creosote, Plastisol®, powder coatings, timber, metal, concrete and glossy paints • Available in BS, RAL and NCS colours • Flexible and micro porous with excellent resistance against cracking, blistering and flaking • Quick drying, self priming water borne system that can be finished in a day • Contains a biocide to protect the dried coating against fungal degradation • Theoretical coverage 12m2/litre
Zinsser AllCoat Exterior Paint is an ultimate performance paint that offers supreme protection to all exterior surfaces. It forms a vapour permeable, low maintenance, water-shedding tough finish that is recoatable in just 1 hour. Available in white, black and a selection of bases that can be tinted to any colour. The paint is self priming and can be applied to previously painted surfaces without sanding. • 8 year performance • Excellent colour retention • Multi-surface application - glossy paints, bitumen, tar, varnish, creosote, Plastisol®, powder coatings, timber, metal, concrete and glossy paints • Available in BS, RAL and NCS colours • Flexible and micro porous with excellent resistance against cracking, blistering and flaking • Quick drying, self priming water borne system that can be finished in a day • Contains a biocide to protect the dried coating against fungal degradation • Theoretical coverage 12m2/litre
Owatrol Polytrol Colour Restorer   is a deep penetrating oil which restores the original colour and appearance of dull or tarnished plastics, gelcoats, metals, and other surfaces. It penetrates the surface, re-wetting the pigments to restore their lustre and colour which has been lost through exposure to sunlight, rain, and pollution and it also gives corrosion protection.  When used on tarnished metals, it brings back the shine and gives long-term protection against corrosion. Simple to apply using a cloth or soft brush, it’s ready to wipe off in just 10 minutes! It can be used on both horizontal and vertical surfaces and can even be used on fibreglass (GRP). Polytrol dries to a tough and long-lasting flexible finish which does not leave a film – so it won’t peel or flake. Ideal uses for Polytrol Colour Restorer Brightening faded car bumpers Reviving the gelcoat on your boat Restoring the shine to metal fixtures Rejuvenating flat or chalky paint dulled by weathering Brightening the surface of tiles in stone, terracotta, marble, slate, etc. Reviving the colour of faded garage doors
Available in BS, RAL and NCS colours Zinsser AllCoat Exterior Paint is an ultimate performance paint that offers supreme protection to all exterior surfaces. It forms a vapour permeable, low maintenance, water-shedding tough finish that is recoatable in just 1 hour. Available in white, black and a selection of bases that can be tinted to any colour. The paint is self priming and can be applied to previously painted surfaces without sanding. • 8 year performance • Excellent colour retention • Multi-surface application - glossy paints, bitumen, tar, varnish, creosote, Plastisol®, powder coatings, timber, metal, concrete and glossy paints • Flexible and micro porous with excellent resistance against cracking, blistering and flaking • Quick drying, self priming water borne system that can be finished in a day • Contains a biocide to protect the dried coating against fungal degradation • Theoretical coverage 12m2/litre
1lt Size Water Based Zinsser AllCoat Exterior Paint is an ultimate performance paint that offers supreme protection to all exterior surfaces. It forms a vapour permeable, low maintenance, water-shedding tough finish that is recoatable in just 1 hour. Available in white, black and a selection of bases that can be tinted to any colour. The paint is self priming and can be applied to previously painted surfaces without sanding. • 8 year performance • Excellent colour retention • Multi-surface application - glossy paints, bitumen, tar, varnish, creosote, Plastisol®, powder coatings, timber, metal, concrete and glossy paints • Available in BS, RAL and NCS colours • Flexible and micro porous with excellent resistance against cracking, blistering and flaking • Quick drying, self priming water borne system that can be finished in a day • Contains a biocide to protect the dried coating against fungal degradation • Theoretical coverage 12m2/litre
Owatrol ESP Primer  makes Any Oil or Water Based Paint stick to shiny smooth surfaces without sanding or mess. Cleans old painted or varnished surfaces and leaves a thin grip film before recoating.  Makes oil or water based paints stick to any smooth non-porous surface.  No tiresome or dusty sanding required.  May be painted over any time after 2 hours or up to 7 days later.  Easy to use... wipe on with a clean cotton cloth or brush.  Will not damage old coatings.  Reduces surface preparation time. WHERE TO USE :   Lacquers, baked enamels, varnishes, gloss paint, powder coated steel,   Ceramics : bathroom or kitchen. Melamine : kitchen cabinet makeover, furniture  Glass, tiles, uPVC, Fibreglass, Melamine, powder coated metal, previously glossed or varnished surfaces,  RECOMMENDATIONS BEFORE APPLICATION   Ensure new finish is compatible with the old finish.  Do not overcoat with 2 pack finishes, cellulose, xylene and urethane coatings . (oil or water based only) Remove any loose and flaking old finish.  For greasy, waxed or varnished surfaces, scrub surface with a green scourer or 00 steel wool soaked with ESP. Wipe off all ESP after 5-10 minutes then follow application instructions below.  Wipe up ESP before drying. Use clean clothes and change them regularly.  Do not contaminate new clean ESP with old used ESP.  Do not use ESP for dipping.  APPLICATION   Apply a liberal application of ESP.  Leave to stand 5 minutes then lightly wipe over the surface in one direction with a clean cloth to remove  excess  ESP.  Allow ESP to dry for 2 hours, before applying the finish.  Coverage:  18 m²/l  Application tools :  Brush, roller, rag.   Application temperature :  +5°C to +35°C   Recoating time :  2h to 7 days.   Clean-up :  Soap +   Water
  • 1
  • Showing 1 - 9 of 9 results
Back to top

© Decorhom 2024.
Online Shop Builder & ePOS System by ShopTill-e.com